Nylon Clip Toggle Anchor

  • A pre-assembled anchor consisting of a carbon steel wing
  • A locking cap/ratchet leg assembly molded from engineered plastic
  • HEXIE ANCHOR
  • Blister Packing / Plastic Kits
  • Heavy Duty
  • Plaster, Wallboard, Concrete Block or Hollow Tile

PRODUCT DETAILS


The nylon clip toggle anchor is a heavy duty hollow wall anchor designed for use in base materials such  as plaster, wallboard, concrete block or hollow tile. The nylon clip toggle anchor is a pre-assembled anchor  consisting of a carbon steel wing and a locking cap/ratchet leg assembly molded from engineered plastic. It is  available in 3/16″, 1/4″, 3/8″ and 1/2″ sizes. When compared to traditional toggles, this unique anchor can be  installed in a smaller hole and does not require a fixture or screw to set it. The anchor can be easily adjusted to  accommodate a wall thickness of up to 2 1/2″ while using a shorter bolt. The bolt and fixture may be installed  and removed as often as necessary.

 

TECHNICAL SPECIFICATIONS

Item Code NCT001 NCT002 NCT003 NCT004
SIZE 3/16″ 1/4″ 3/8″ 1/2″

 

INSTALLATION 

1.Drill the proper size hole into the cavity of the hollow base material.
2.Position the wing parallel to the plastic legs and slide the anchor through the drilled hole into the hollow cavity
3.Pull the wing firmly against the inside wall of the hollow material using the ring, then slide the plastic cap forward until the flange is seated flush against the work surface.
4.Place your thumb between the plastic straps and snap the straps off.
5.Position the fixture. Insert the bolt through the fixture and tighten. The minimum bolt length should be at least 1/2″ longer than the combined wall and fixture thickness.

 

Request A Quote

Our quality products, prompt delivery, and competitive prices have given us much customer praise.

Pursuing a “Quality First, Service First” policy, we will continue to serve domestic
and overseas customers. 

Inquiry Now